X610 Series
3 IN-00020 [REV001] 201709
Parts Description
Selecting the Location
Select a firm, vibration-free and horizontal location for the scale. Avoid locations with direct sunlight, excessive air
current, heat sources, or rapid temperature fluctuations.
Make sure that your remote display and scale base are on and within range within 10 meters (30 feet).
Power
X610 support wireless and wired connection.
Wireless connection
Require 10-AA batteries, 4 for remote display, 6 for scale base.
Wired connection
Connect the AC Adaptor for scale base and remote display to the AC mains supply. Connect the plug to the AC jack on
the bottom of the scale as shown in the illustration below. The power outlet should be close to the scale and easily
accessible.
Battery Power
The remote display uses 4-AA batteries and the scale base uses 6-AA batteries, both units will automatically switch to
battery operation if using wireless connection there is a power failure or the power cord is removed to provide
uninterrupted scale operation.
Note:
When low battery
,
is displayed, the scale will shut off after 120 seconds.
CAUTION:
Risk of explosion can occur if replaced with the wrong type or connected improperly.
Do not disassemble, repair or otherwise manipulate the battery socket.
Obey the local laws and regulations on disposing the battery.
Stainless Steel Scale Base
Remote Display
