LiPo & LiFe, LiTo Battery Management System BMS24T V4.0
www.chargery.com
page 2 total 41
Chargery BMS24T is designed especial for LiPo,LiFe and LiTo battery packs applied to storage energy systems
and Electrical Vehicles including E-Motorcycle, E-Scooter and so on. The unit can measure or detect the
battery voltage, cell voltage, charge & discharge current, battery temperature, and battery SOC (State of
Charge), the information is displayed with TFT color LCD screen.
Safety Notes
Please read the entire manual completely before using, to ensure safe and efficient use.
1.
Ensure the BMS program and settings match your battery pack, otherwise the battery may be damaged
and a dangerous situation may arise, especially for Lithium based batteries, which may catch fire.
2.
Use the Battery Cell Manufacturers specifications and information when configuring your BMS.
3.
For Energy Storage System and Electric Vehicle applications, there are many different requirements,
please adjust those key parameters carefully for your application, or contact us for more details.
4.
Do not allow water, moisture, metal wires or other conductive materials to come in contact the device.
5.
Never charge or discharge any battery having evidence of leaking, expansion/swelling, damaged outer
cover or case, color-change or distortion.
6.
Do not try to charge “non-rechargeable” dry cells.
7.
Do not mix batteries of different types, different capacities or from different manufacturers, all cells used
should be of matching specifications.
8.
Do not exceed the battery manufacturer’s suggested maximum charge and discharge rates.
9.
Carefully follow the battery pack manufacturer’s recommendations and safety advice.
Warning
1.
The Current shunt must not make contact with any metal including the BMS case
2.
The BMS case should not be in direct contact to any metal
3.
Current shunt must connected to the Battery Pack Negative !
4.
Prevent BMS from vibrations and shaking
5.
Ensure the BMS case does not make contact with battery wiring in any way.
Copyright
Copyright@Chargery Power Co., Ltd. All rights reserved.
Without prior written consent by Shenzhen Chargery Power Co., Ltd, any units or individual extract and copy
parts or entire contents of this manual, and transmission in any form is illegal and strictly prohibited.
The product described in this manual, may include copyright software ownership belongs to Shenzhen
Chargery Power Co., Ltd and its licensee, except getting the permission from relevant rights holders,
otherwise any copy, distribute, modify, excerpt, decompile, disassemble, decrypt, reverse engineering, lease,
transfer, sub-license, as well as other acts of infringement of software copyright is strictly prohibited, but
apart from the restrictions prohibited by applicable law.
