C10325
v1.0
High efficiency wide input voltage
PFC programmable Charger
90V~265VAC input
For 4S~24S LiPo/LiFe battery
1~25Amps 1500W max.
www.chargery.com
page
5
total
16
Operation Instructions
Charge flow diagram
Connect charger to
AC outlet
Detect Battery voltage
The lowest value<Vb<setup value
Battery Vol. low: no battery, reverse polarity of
battery, output short circuit or under the lowest
voltage after pre-charge 1min at 1A
Battery Vol. High: battery voltage over setup
NO
Decrease charge
current and charge
Charge current is less than setup?
Or -delta voltage is large than setup?
NO
Stop charging
automatically
Initialize and work at idle
mode, ready to charge
Press Knob button for 3
seconds start to charge
any cell voltage is over
charged?
Continue to charge
NO
Connect battery to charger
Connect charger to
CHARGERY BMS
Start to charge at CC / CV
mode (LiPo, LiIo,LiFe, LiTo,
Pb), CC mode (NiMh/NiCd)
Choose Battery Type
Setup charge parameters
Shortly press Knob
Shortly press Knob
longer press Knob
Charge power >
1500W?
NO
Start to charge at last setup
Restart Charge?
Charge again,
maintain battery voltage
Vb<The lowest value
Pre-charge
