LT-CMPH-85
Page 4 of 4
3.7
Install the Appropriate Customer Equipment
Figures 4 and 5 display the internal components of the standard enclosure configurations. Follow company practices for the type of
installation to be performed.
4.
CABLING
Follow company-approved procedures for all copper cable preparation and splicing.
5.
TECHNICAL ASSISTANCE AND REPAIR SERVICE
For questions on product repair or if technical assistance is required, contact Charles Technical Support at:
847-806-8500
800−607−8500
847−806−8556 (FAX)
techserv@charlesindustries.com
http://www.charlesindustries.com/main/tech_support.htm
6.
WARRANTY & CUSTOMER SERVICE
Charles Industries, Ltd. offers a one-year warranty on the CUBE product. The Charles warranty is limited to the operation of the CUBE
hardware as described in this documentation and does not cover equipment which may be integrated by a third party. The terms and
conditions applicable to any specific sale of product shall be defined in the resulting sales contract. For questions on warranty or other
customer service assistance, contact your Charles Customer Service Representative at:
847-806-6300
847−806−6653 (FAX)
(email)
http://www.charlesindustries.com/main/telecom_sales_support.htm
7.
ACCESSORIES
Category
Charles Part Number
Direct Bury Installation:
Mounting Stake, includes mounting hardware
UMS42-STD (Order 2 pieces per enclosure)
Table 2
Accessories
Figure 4
CMPH-8500N Copper Splice
Internal Components
Figure 5
CMPH-850FN Fiber Closure
and Fiber Cable Slack Storage Internal
Components
