23
6b.31 Under the daily and week timer mode, Press
:
6b.32 To turn the heater off when the heater is on
during a preset heating period.
6b.33 To turn the heater on when the heater is off
in between preset heating periods.
Adaptive Start Control
6b.
34
According
to room temperature and set
temperature, the heater will automatically
come on in time to heat the room to the set
temperature at the set time. For example, if
your timer is set to start at 18:00 and
temperature is set to 23°C, the fire will come
on at 17:30 to ensure the room is 23°C at
18:00.
Window Open Detection
6b.35 When the transmitter detects a rapid drop in
room temperature, it will be judged as a
window open, the warning icon will be
displayed and the heating will be turned off
automatically.
6b.36 After the indoor temperature has risen or a
manual override of the warning (by operating
remote control) has been done, the fire will
return to normal working state.
Set up the communication between the remote
and appliance
6b.37 The below operations should be carried out
before programming, when changing to a
new remote or in the event the appliance
cannot be controlled by the remote:
•
Hold the reset button on the appliance for 3
seconds (pen Point may needed) until you
hear 3 short beeps from the unit, release the
button.
Summary of Contents for 1500E
Page 2: ......
