20
LT8019
Please note suitable wall plugs fixings and screws must be used to support the weight of both mounting bracket / stove.
Non-combustible hearth requirements
The appliance must be fitted with a hearth that is 50mm high and projects 100mm to the front and sides.
Minimum size of 626mm wide x 456mm deep x 50mm high.
Distances from Non-combustible materials:
The stove can be recessed in a suitable sized non-combustible fireplace but a permanent free air gap of at least
50mm must be left around the sides and top and at least 50 mm at the back of the stove to obtain reasonable heat
output and for access to the stove for removal and maintenance.
Minimum clearances required to combustible material (Note the shelf clearances are for rear vent
installation only)
Summary of Contents for Edge 3s BF
