3
Item Parts
Qty
1.
Fire Bowl
1
2.
Fire Bowl Legs
3
A.
Bolt
6
B.
Nut
6
Assembly Instructions
For Easiest Assembly:
• To avoid losing any small components or hardware,
assemble your product on a hard level surface that
does not have cracks or openings. You may wish to
lay down a blanket or similar, to avoid possible
damage to the finish during assembly.
• Clear an area large enough to layout all components
and hardware.
• Great care has been taken during production to
remove sharp edges but you should handle all
components with care to avoid injury.
• Check you have all components before beginning.
• When applicable, tighten all hardware connections by
hand first. Once the step is completed go back and
fully tighten all hardware.
• Follow all steps in order to properly assemble your
product.
Typical assembly: approximately ½ hour.
Tools required:
• Adjustable Spanner or Socket Wrench
• Phillips Screwdriver
Parts List
Step 1
Assemble Fire Bowl by inserting bolts through the holes
in bowl and attach hand tight with nuts.
Step 2
Fasten all 3 Legs in the same manner, once all the Legs
are attached place unit on a level surface and tighten
with a Phillips screwdriver and a adjustable wrench.
