25
Halogen Lights
Light Operation Instructions
1. Make sure the light power switch on the control panel is in the “OFF” position.
2. Connect power plug to properly grounded outlet.
3. Turn the light power switch to “ON.”
Halogen Bulb Replacement
1. Make sure that the grill has cooled before changing the light
bulb.
2. Make sure the light’s power switch on the control panel is in
the “OFF” position and power plug is disconnected from the
outlet.
3. Use a Phillips screwdriver to loosen the screw securing the
light cover.
NOTE:
When removing final screw from light cover, make sure to
use other hand to hold cover in place, ensuring it doesn’t fall and
shatter.
5. Remove the glass cover from the light bulb housing.
HINT:
Use a flathead screwdriver to open it easily.
WARNING
Keep any electrical supply cord away from any heated surface.
4. Loosen the screw securing the light.
Figure 246
CSA INTERNATIONAL
Project 2078110
26 of 46