Charmhigh-V1.0-2016 |
28
All Rights Reserved
10.
Test
Used for testing modules of SMT machine respectively, window as show below.
Figure.
10-1
(1)
Mhead 1\2:
Button down then nozzle press down, button up then nozzle up;
(2)
Vacuum 1\2:
Click button to switch nozzle in suction;
(3)
Rotate 1\2:
Button down then nozzle anticlockwise rotate 180º, button up then
return back;
(4)
Blow 1\2:
Click button to switch nozzle in blow;
(5)
Up work light:
Click to open or close up camera work light;
(6)
Down work light:
Click to open or close down camera work light;
(7)
Collect film:
Click to collect film one time;
(8)
Pull needle:
Button down then pull needle down, button up then pull needle up;
(9)
Pull tape position:
Move pull needle to specified position of tape;
(10)
Material stack position:
Move nozzle to specified position of material stack;
(11)
PCB origin:
Move nozzle to PCB origin;
(12)
Move:
Move mount head to certain position;
(13)
Machine origin:
Click then mount head return to origin;
(14)
Nozzle 1\2 to up camera:
Move nozzle 1\2 to position of up camera.
(15)
To Far:
Move nozzle part to right top.
