11
setting. (If you create file manually, then you can press
to adjust
the position.)
(10)
Coordinate Y:
usually work file generated from software no need to change the
setting
.
(If you create file manually, then you can press
to adjust
the position.)
(11)
Skip comp:
means not place this component
(12)
No throwing inspection:
means forbid throwing materials due to lack of
vacuum.
(Note: 1. If you have enable "use vision" function, then this function can
be OFF.
)
(13)
Use vision:
means open camera vision system, if turn off, the speed will
increase but accuracy will be lower.
(14)
Coord. Set:
After press the cross, machine head moving to the component
position, and you can move the arrow to set the component position seeing from
down-looking camera (when you are creating work file manually in machine).
6.1.1.2. Coordinate set
