Using The Sander
This sander is designed for use with wood and wood-based products only.
It should not be used for sanding metal and any such use would invalidate the warranty.
Sanding with the belt in the horizontal
position
The worktable must always be used
as a support when carrying out edge
or face sanding in the horizontal
position.
Move the workpiece across the belt
while keeping one edge against the
worktable.
Do not use excessive pressure and
take extra care when sanding thin
material.
Sanding internal curves
With care the idler drum end of the
sanding belt can be used for
smoothing & shaping the inside of
curved workpieces.
Never present the end of a workpiece
to the drum as this can cause it to
kick back.
Summary of Contents for BD48
Page 14: ...Charnwood BD48 Parts Drawing ...
