5
recommended when working outdoors.
Wear protection hair covering to contain
long hair.
9. Use safety glasses
Also use a dust mask during pulverulent
operations and wear ear protection. If the
noise level exceeds 85 dB (A), ear
protection is obligatory. Indicated noise
levels many be exceeded dependent on
the working environment and the material
to be treated.
10. Use dust extraction
If dust extraction and collection devices
are present on the tool, make sure that
they will be used properly.
11. Do not abuse cord
Never carry tool by cord or yank it to
disconnect it from wall outlet. Keep cord
from heat, oil and sharp edges.
12. Secure work
Use clamps or a vise to hold the
workpiece. It is safer and it frees both
hands to operate tool.
13. Do not overreach
Keep proper footing and balance at all
times.
Not reaching into the splitting zone.
14. Maintain tools with care
Keep tools sharp and clean for better and
safer performance. Follow instructions for
lubricating and changing accessories.
Inspect tools cords periodically and, if
damaged, have them repaired by an
authorized service facility.
Inspect extension cords periodically and
replace if damaged. Keep handles dry,
clean and free from oil and grease.
15. Disconnect tools
When not in use, before servicing, and
when changing accessories such as
blades, bits and cutters.
16. Remove adjusting keys and wrenches
Form the habit of checking to see that
keys and adjusting wrenches are removed
from the tool before switching it on.
17. Avoid unintentional starting
Do not carry plugged-in tools with finger
on switch. Be sure that the tool is switched
off before plugging in.
18. Outdoor use extension cords
When tools is used outdoors, use only
extension cords intended for use outdoors
and so marked.
19. Stay alert
Watch what you are doing. Use common
sense. Do not operate tools when you are
tired.
20. Check damaged parts
Before further use of the tool, a guard or
other part that is damaged should be
carefully checked to determine that it will
operate properly and perform its intended
function. Check for alignment of moving
parts, binding of moving parts, breakage of
parts, mounting, and any other conditions
that may affect its operation. A guard or
other part that is damaged should be
properly repaired or replaced by an
authorized service center unless
otherwise indicated elsewhere in the
instruction manual. Do not use tool if
switch does not turn it on and off.
21. Warning
The use of any other accessory or
attachment other than recommended in
the instruction manual may present a risk
of personal injury.
22. Have your tool replaced by an expert
This electric appliance is built in
accordance with the relevant safety rules.
Repair of electric appliances must only be
carried out by experts otherwise it may
cause considerable danger for user.
Store these instructions for future reference
