ADDITIONAL RULES FOR PLANER/THICKNESSERS
1. This machine is designed for use with wood. Attempting to plane or thickness any other materials
will result in damage to the machine, potential fire risk and/or health hazards.
2. The machine is designed for indoor use only.
3. Connection to a suitable dust extraction system is highly recommended. If you must use the
machine on its own, you will need to stop it, unplug it from the mains and thoroughly clean it at
regular intervals. Continuing to use the machine when it is clogged with shavings will result in
damage to it, potential fire risk and/or health hazards.
4. The machine should be bolted to a bench or suitable stand.
5. Always hold the work firmly on to the table, using the push pads provided.
6. Never use the planer/thicknesser with the guard and/or dust hood removed.
7. If planing or thicknessing a long piece of timber, provide additional support at the same height as
the table.
8. Switch the machine off and unplug it before removing any debris.
9. Be aware of the possibility of kickback.
10. Do not modify this machine in any way or use it or anything other than its designated purpose.
Neither the manufacturer nor the suppliers will be liable for any damage or injury caused by
incorrect assembly, operation or electrical connection of this machine.
Risk of Injury!
Wear Eye
Wear Ear
Never reach into
Protection
Protection
a running cutterblock
Charnwood PT250 Specification
Voltage and frequency
240V at 50hz.
Motor (Carbon brush)
1500w (2hp)
Planer width
252mm (10
”)
Maximum planing cut
2mm
Work Table
915 mm x 210 mm
Table height
360 mm
Fence tilt
90 to 45°
Max thicknessing cut
2mm
Thicknessing capacity
5 to 125mm
Feed speed
8 m/min
Number of blades
2
Cutter block rotation
9,000 rpm
Dimensions (WxDxH)
945mm x 470mm x 480mm
Weight
30kg
Rating
Hobby
Warranty
1 Year
Summary of Contents for PT250
Page 14: ...Charnwood PT250 Parts Diagram ...
Page 15: ...Charnwood PT250 Parts List ...
