Here you can see the tapered
end of the spindle.
Locate the spindle lock on the
right hand side of the machine.
Rotate the tapered spindle
slowly whilst pushing the locking
bar inwards.
When the lock engages the bar
will slide in around 10mm and
the spindle will be locked.
Pull the bar out to unlock the
spindle.
With the tapered spindle locked,
fit the upper spindle.
Use a flat screwdriver to
unscrew the locking ring in the
centre of the upper spindle.
Place the upper spindle over the
taper and tighten the retaining
screw by passing a 6mm Allen
key into the centre of the spindle.
Next use the flat screwdriver to
tighten the locking ring down
onto the head of the retaining
screw.
Warning: Failure to tighten the
locking ring may result in the
arbor and cutter block coming
loose.
