4
3. Guards should be of such a design and fitted in such a way that they keep fingers out of an
area of 50 mm (2 inches) beyond the sweep of any cutter that might be used.
4. Always ensure that you use safe working procedures and that you understand what you are
doing.
5. Wear appropriate clothing. Long loose sleeves, long hair or anything else that could get
caught in the machine should be tied back or otherwise secured.
6. Never use this spindle moulder for curved work.
7.
NEVER
use a cutter block without limiters.
8. Feed the workpiece to the cutter block or router bit against the direction of rotation.
9. Never draw the workpiece back during cutting. Wait until the block stops rotating before
pulling the workpiece back.
Risk of injury!
Wear Eye
Wear Ear
Never reach into
Protection
Protection
moving tooling.
Specification
Main table surface
600 x 400mm
Sliding beam surface
1,000 x 200mm
Sliding beam stroke
620mm
Table height
870mm
Dimensions (WxDxH)
1000mm x 1070mm x 1280mm
Weight Net/Gross
82/85kg
Spindle diameter
30mm
Rotation speeds
4(1400/4000/6000/9000) rpm
Spindle length available for tooling
105mm
Spindle rise and fall
110mm
Table aperture (with inserts)
160mm ( 110/75mm )
Table aperture depth
50mm
Motor (induction)
240V, 1500W single phase
Fence size
125 x 700 mm
Extractor outlet
100mm
Rating
Light trade
Warranty
1 year
Rating
Light Trade:
Suitable for professional woodworkers where the machine will not be in daily use.
Mid-range machines with a heavier build and more power. Typically used by 2 or 3 people within a
small business and also for the dedicated hobbyist with a larger budget. It is expected to be used
up to the machines maximum limit with occasional long work periods. Suitable for income
generation.
Expected maximum use of 300 hours annually.
