7
The workpiece should be able to pass unhindered under the guard.
Set guide fence angle, if planer is to be used for beveling.
Start machine at on/off switch (11).
Slide item slowly and steadily towards blade.
Thicknessing
IMPORTANT: The Dust Extaction Hood must be fitted over the cutterblock before operating
the machine. Sensors will detect if the hood is not fitted correctly and disable the switch.
Arrange blade guard over blade housing and secure in place.
Set thicknesser to desired depth using handle.
Planing depth can be seen on indicator (14).
Start machine.
Place workpiece on thicknesser table on side of machine with arrow, and slide slowly and
steadily forward with side to be planed facing upwards.
Wedge-shaped items must be planed thick end first.
