1
2
3
4
5
6
Remote controller
The remote controller is used to control the drone. It connects wirelessly
via Bluetooth to your mobile phone/tablet. The remote controller's phone/
tablet mount supports devices ranging from 5 inches to 10.5 inches.
11
9
10
8
7
7
1 Power Switch: Turns controller on/off.
2 Mode Switch: Depth-lock mode is default and unique for Dory, so you do
not need to press it.
3 Bluetooth Indicator: Light is solid on when Bluetooth is connected. Light
flashes when not connected or when charging.
4 Power Indicator: Each LED represents 25% of the controllers battery. When
all four lights are on the battery is fully charged.
5 Unlock/Lock: Unlock/Lock the motors.
6 Lanyard Attachment: If desired, a safety lanyard can be attached here to
prevent the controller from falling
7 Joysticks: Used to control the navigation of the drone.
8 Video/Photo Mode: Press to switch between video and photo mode.
9 Video/Photo : Press to start/stop video recording or take photo.
10 LED Light Control: Scroll right/left to increase/decrease brightness of LED lights.
11 Angle Adjustment: Scroll right/left to raise/lower the head of the drone.
Press dial down to return to horizontal position.
