Chassis Plans CPX1-241 Technical Reference
Appendix A – Display Serial Control Programming
Page 46
Display Mark Command
Function
Command
Description
Acknowledge (if enabled)
Send Display Mark 0xF1,
”S” |
”0x21” | ”0x40”
”0x60” | ”0x7E”
”0x22” | ”0x42”
#
”0x23” | ”0x43”
#
Return “1”
“S” = “0x53 or 0x73”
ASCII “0x21,0x40,
0x60,0x7E
0x22, 0x42”
#
0x23, 0x43”
#
Return “ 0x31”
“S” – Send Command
0x21 : Full size cell black block
0x40 : Full size cell white block
0x22 : 1/2 cell black block
vertical size
#
0x42 : 1/2 cell white block
vertical size
#
0x23 : 8 x 8 triangle (BLACK)
#
0x43 : 8 x 8 triangle (WHITE)
#
“1” - successful.
e.g Send Display Mark
RS232 Code: “0xF1 0x53 0x21”
Return Code: “0xF1 0x53 0x21 0x31”
Clear Display Mark
0xF1,
”C”
Return “1”
“C” = “0x43 or 0x63”
Return “ 0x31”
“C” – Clear command
“1” - successful.
e.g Clear Display Mark
RS232 Code: “0xF1 0x43”
Return Code: “0xF1 0x43 0x31”
Display Mark
Horizontal Position
0xF1,
|”H” |”ss”|
Return “nn”
“H” = “0x48 or 0x68”
------------------------------------------
--“nn” = “0x30,0x30~0x46,0x46”
“H” – Horizontal Position
command
“ss” – Set Horizontal Position
number
“nn” – Return Position number
e.g Set Display Mark Horizontal Position
RS232 Code: “0xF1 0x48 0x30 0x31”
Return Code: “0xF1 0x48 0x30 0x31 0x30 0x31”
Display Mark
Vertical Position
0xF1,
|”V” |”ss”|
Return “nn”
“V” = “0x56 or 0x76”
------------------------------------------
--“nn” = “0x30,0x30~0x46,0x46”
“V” – Vertical Position command
“ss” – Set Vertical Position
number
“nn” – Return Position number
e.g Set Display Mark Vertical Position
RS232 Code: “0xF1 0x56 0x30 0x31”
Return Code: “0xF1 0x56 0x30 0x31 0x30 0x31”
Display Mark
Background
Transparency
0xF1,
|”B”|”N”|
Return “n”
“B” = “0x42 or 0x62”
Set Transparency command
-------------------------------------------
“N” = “0x30~0x46”
Transparency Value
(Rang 00~0F)
“B” - Transparency command
“N” – Transparency Value
“n”- Return Value
0x00 =opaque
Set Display Mark background Transparency value is 8
RS232 Code: “0xF1 0x42 0x38”
Return Code: “0xF1 0x42 0x38 0x38”