Install the tie rod end in the steering arm.
Hold it in place next to the tie rod and adjust
the jam nut until it is against the tie rod end.
Remove the tie rod end from the steering
arm and thread it onto the tie rod until it
contacts the jam nut. Next, reinstall the tie
rod end into the steering arm. Verify the
distance from the frame to the inside of the
tie rod end; this should be 8 5/8 inches as
measured earlier.
Repeat this procedure for the passenger
side. The measurements are the same as
the driver side.
917704
Page
25
Summary of Contents for 7704
Page 105: ...Page 104 917704 ...