DX-2
www.chasswheel.com
rev. 1
2014-05-08
14
2.1.1 Joystick
The speed and direction of the wheelchair is adjusted by the joystick. The further you push the stick
from the central position, the greater the drive speed. Releasing the joystick stops the wheelchair
and applies the parking brakes. The joystick is also used for adjusting extra operations.
Joystick with a standard knob is suitable for most users. There are different alternatives to this knob
or the knob can be tailor-made. Do not replace the knob with self-made parts, as they may cause
dangerous situations.
1)
Drive lever
2)
Display
Top side
Display and controls
3) Direction indicators left and right
4) ON / OFF key
5) Function key
6) Activate drive mode / switch-through
numbers 1 to 5 in the display
7) Direction indicators right and warning
blinker
8) Activate setting mode / switch-through
9) Horn
Display
10) Status bar indicator
11) Drive mode or setting mode display
Assigment of display fields in display to keys
Bottom
1) Socket for charging and for programming
the remote
2) Socket for bus cable
3) Socket I for Buddy Button (corresponds to
