DX-2
www.chasswheel.com
rev. 1
2014-05-08
43
joystick reaction time, time settings for the power save mode, wheel turning speed etc. If you wish
to change the drive properties of your wheelchair, contact the wheelchair deliverer or manufacturer.
8. RE-USE and recycling
Wheelchair is suitable and intended for re-use. For re-use wheelchair is serviced completely. In the
wheelchair there are several different adjustment possibilities. For new user the necessary changes
and adjustments are done to the wheelchair, for example to the seat, to the arm- and footrests and
to the control system.
All the parts that are removed or replaced should be recycled in proper way. There are own recycling
points for metal (metal parts), plastic (fenders, covers), rubber (tyres, arm rests, bushings),
hazardous waste (gas springs, gel batteries).
Other components, for example driving motors, actuators, electric components, seats, should be
delivered to the distributor or the manufacturer and they will take care of the recycling.
9. Wheelchair storage
Protect the wheelchair from heat and moisture during storage. The wheelchair goes into the smaller
space by folding the back rest, the arm rests and the foot rest.
Disconnect the batteries and store them fully recharged in a dry and cool place. During the storage
the batteries should be recharged at least once every six months.
10. Use of the wheelchair as a seat in a vehicle
In order to use a wheelchair as a motor vehicle seat, it needs to be equipped with attachment points
to enable anchoring in the motor vehicle. These accessories may be included in the standard scope
of wheelchair order but may also be obtained from Chasswheel as an option.
