DX-2
www.chasswheel.com
rev. 1
2014-05-08
45
• Secure the wheelchair at the front (1) and at the rear (2) with the anchoring system belts
Front
Rear (only left-hand side visible in picture)
How the user is secured within the wheelchair
CAUTION: There is a danger of injury if the user is not properly secured within the wheelchair!
• Even if the wheelchair is fitted with a postural belt, this is no substitute for a proper safety belt
which complies with ISO 10542 in the transport vehicle. Always use the safety belt installed in the
transport vehicle.
• Safety belts must be in contact with the user's body. They must not be held at a distance from the
user's body using parts of the wheelchair such as armrests or wheels.
• Safety belts must be pulled as tightly as possible without causing the user discomfort.
• Safety belts must not be positioned while twisted.
• Ensure that the third seatbelt anchorage point is not fixed directly to the vehicle floor, but to one of
the vehicle uprights.
• A headrest must be installed! The headrest optionally supplied for this mobility device by
Chasswheel is perfectly suitable for use during transport.
• The headrest must be adjusted to the user's ear height.
