R-NET
www.chasswheel.com
rev. 1
2014-05-08
14
By pressing this push button, all the wheelchair’s indicators will switch on.
Pressing the push button again will switch the indicators off. When the
warning indicators are on, the LEDs next to the push buttons for warning and
direction indicators will flash.
Lights switch
The drive lights are switched on and off. When the drive lights are switched
on, the LED next to the push button will illuminate.
Charger socket
The charger socket is situated beneath the control unit. The socket is used for recharging the
wheelchair’s batteries or to lock the wheelchair. Only connecting the proper charger plug or lock key
is permitted.
LCD DISPLAY
The state of the driving controller can be observed using the icons shown on the display.
The icons shown and used on the display are the following.
Battery indicator
The picture shows the battery’s charge level. High number of dark
pillars indicates good charge level. If the icon flashes slowly, the
battery charge level is low and they should be recharged immediately.
When the batteries are recharging, the pillars will be darkened from
left to right. The wheelchair cannot be used until the charger has been
detached from the charger socket and the drive –controller has been
switched off and back on.
