R-NET
www.chasswheel.com
rev. 1
2014-05-08
17
2.2 BACK REST, HEAD SUPPORT, ARM REST AND FOOT REST ADJUSTMENTS
While making the adjustments, beware the possible flattening hazards. To get the best adjustment
result, use the help of the attendant or service person.
BACK REST ADJUSTMENT
The wheelchair seat’s back rest can be manually or
electrically adjustable. While adjusting the back rest, assure
that there will not be anything between the back rest and
the battery casing cover, nor the back rest does not pressed
against the battery casing cover.
MANUALLY ADJUSTABLE BACK REST
The back rest is manually adjusted either by pulling the lever
on the side of the back rest while reclining the seat or by
turning the wheel on the side of the backrest, until the
desired position is found.
ELECTRICALLY ADJUSTABLE BACK REST
An electrically adjustable back rest is adjusted with the
driving controller. The adjustment mode is chosen by first
pressing the MODE button and then moving the joystick to
the left or right until the seat icon on the display only
highlights the back rest section. The back rest is then
adjusted by moving the joystick forwards and backwards. By
pressing the MODE button, you can return to the drive
mode.
HEAD SUPPORT ADJUSTMENT
The height of a two-rod head support can be adjusted by
moving the head support up or down. On the head support’s
joist there are notches into which the head support can be
positioned at the desired height.
