R-NET
www.chasswheel.com
rev. 1
2014-05-08
33
• Only ever use leak-proof batteries!
CAUTION: There is danger of injury, if the batteries are not properly secured!
• Secure the battery belt with the safety
How the wheelchair is anchored in a vehicle for use as a vehicle seat
The power wheelchair is fitted with four anchoring points, which are labeled with
the symbol shown on the right. Snap hooks or belt loops can be used for fixation.
• Secure the wheelchair at the front (1) and at the rear (2) with the anchoring system belts
Front
Rear (only left-hand side visible in picture)
How the user is secured within the wheelchair
CAUTION: There is a danger of injury if the user is not properly secured within the wheelchair!
• Even if the wheelchair is fitted with a postural belt, this is no substitute for a proper safety belt
which complies with ISO 10542 in the transport vehicle. Always use the safety belt installed in the
transport vehicle.
• Safety belts must be in contact with the user's body. They must not be held at a distance from the
user's body using parts of the wheelchair such as armrests or wheels.
• Safety belts must be pulled as tightly as possible without causing the user discomfort.
• Safety belts must not be positioned while twisted.
• Ensure that the third seatbelt anchorage point is not fixed directly to the vehicle floor, but to one of
the vehicle uprights.
