R-NET
www.chasswheel.com
rev. 1
2014-05-08
50
SAFETY BELT USE
The Lift System is equipped with a safety belt. The use of this is always recommended whilst sitting
in the wheelchair and must absolutely be used whilst using the Lift System.
The safety belt must always be adjusted as suitable for the user.
SEAT OPERATION ADJUSTMENT
The wheelchair seat is adjusted by pressing the MODE-button, whereupon the picture of the
adjustment appears on the screen. The seat part, which is seen darkened in the picture, is at that
moment adjusting. Adjustment happens by moving the guidance stick forwards and backwards.
Choosing the different parts of the seat occurs by moving the guidance stick to the right and left
sides by quick movements. By pressing the MODE button again, you can get back to the drive
situation.
FOOT SUPPORT ADJUSTMENT
The angle of the foot support is adjusted by selecting the foot support
adjustment from the MODE selection of the drive control. The
operational state is chosen when the foot support on the display is
visibly darkened. The foot support is adjusted by moving the guidance
stick forwards and backwards.
FOCUS OF GRAVITY ADJUSTMENT
The centre of gravity can be adjusted when the seat part and the
horizontal arrow are visibility darkened. The centre of gravity
adjustment is used for driving in the sitting position up and downhill
and as an aid during the Stand Support System. When the seat is
rised with lift operation, you are not able to adjust the gravity point
backwards.
RAISING THE SEAT SECTIONS
The height of the seat can be adjusted when; the seat section and the
vertical arrow are visibly darkened.
ADJUSTMENT OF THE BACK SECTIONS
