www.chasswheel.com
20
Bottom
1) Socket for charging and for programming
the remote
2) Socket for bus cable
3) Socket I for Buddy Button (corresponds to
“Activate drive mode / switch-through” key).
This key is deactivated as standard.
4) ON/OFF socket for Buddy Button (corresponds
to ”ON/OFF” key)
5) Socket II for Buddy Button (corresponds to
”Activate setting mode” key).
This key is deactivated as standard.
The cover cap must be removed if sockets 2 to 5 are to be used.
To do this, remove the Phillips screw.
Status display
Status display
The status display is located at the top edge of the screen.
It contains the following information:
1) Battery
2) Direction indicators left, warning blinker
3) Light
4) System status
If the system is working without faults,
no symbol is displayed
If a fault occurs, the ”spanner” symbol is displayed with an error code.
5) Direction indicators right, warning blinker
6) Time
