www.chasswheel.com
22
System status
The system status is shown in the middle of the status display if a
fault occurs.
An error code is displayed to the right of the "spanner" symbol. You
can use this error code to help find the cause of the fault as
described in Chapter 2.10
Using Buddy Buttons with the remote
A Buddy Button (4) is an additional button which can be used to activate remote functions. The
sockets for Buddy Buttons are located underneath the remote.
1) Socket I
(corresponds to "Activate drive mode/switch-through"
key)
The button is deactivated as standard.
2) ON/OFF socket
(corresponds to "ON/OFF" key)
3) Socket II
(corresponds to "Activate setting mode" key)
The button is deactivated as standard.
4) Buddy Button
The cover cap must be removed if sockets
1 to 3 are to be used.
To do this, remove the Phillips screw.
