35
www.chasswheel.com
In Focus
If the wheelchair has another driving controller. such as a secondary
Joystick Module or a Dual Attendant Module, the InFocus symbol is
displayed. The icon indicates that the primary driving controller is not
in control.
Restricted speed
If the speed of the wheelchair is limited because of a sharp turn, raised
seat, the stand support or lift function etc., this symbol will be
displayed. If the wheelchair is inhibited from driving, the symbol will
flash.
Restart
When the Restart icon flashes on the display, the driving controller
must be restarted.
Fault
When the system detects a fault, the Fault icon appears on the
display. Refer to section “Electric malfunctions”.
Motor temperature
This icon appears on the display when the system has automatically
reduced power input to the motors to prevent overheating.
Control system temperature
This icon is shown on the display when the control system decreases
power to protect itself from overheating.
Timer
This icon is shown when the control system is changing from one
operation mode to another. The sand glass represents the time
lapsing.
