Positioning for Storage and Transport
1.
While holding onto the Swivel Release
Knob, pull out the T Handle.
NOTE:
The OptiFlex3 unit must be
properly positioned in line with the
Clamp Support Assembly before
releasing the T Handle.
When pulling out the T Handle, make certain you also have a grasp on the Swivel Release
Knob. The Swivel Release Knob can swing up and cause injury or damage other equipment.
2.
With T Handle pulled, carefully place
the OptiFlex3 unit in the vertical
position. Release T Handle.
3.
While stepping on the height
adjustment pedal, press down on
the Clamp Support Assembly to
completely lower the unit.
NOTE:
Always store and transport the
unit as shown.
