1.
To place unit in operational position,
simply tilt the unit to the horizontal
position until the T Handle engages the
Clamp Support Assembly.
2.
Loosen the Swivel Release Knob by
turning counterclockwise.
3.
Rotate the unit 90° as shown.
4.
Tighten the Swivel Release Knob.
NOTE:
The unit may be rotated in either
direction or up to approximately 300° as
desired.
5.
Step on the Height Adjustment
Pedal and pull up on the Clamp
Support Assembly to raise the unit.
When necessary, step on the Height
Adjustment Pedal while pressing
down on the unit to lower the unit.
Positioning for Patient Use
