1. Power on DCSS/CTCSS Setting mode
No Button
Functions
1
To enter
JogButton/JogDial
Press “Power Key” & “PTT” Button more than 3 Sec
Display on LCD
Display 1 time Beep
Voice display 1 : "Please Look at the LCD"
Voice display 2 : "DCSS & CTCSS Setting"
Display channels to set
2
To set
JogButton/JogDial
Press JogButton/JogDial
("Channel" -voice guidance)
-->change channel UP/DOWN
("Channel1~ Channel22" -voice guidance)
-->To select channel ( press JogButton/JogDial)
-->To change tone ( UP/DOWN) (DCSS/CTCSS/mute tone)
-->select tone (Press JogButton/JogDial)
-->To change frequency tone (UP/DOWN)
(Channel UP/Down -voice guidance)
--> To select frequency tone(press JogButton/JogDial)
("Completed"- voice guidance)
3
To complete & go
upper menu
JogButton/JogDial
1.
While selecting tone, press quickly JogButton/JogDial twice to go upper menu.
voice guidance will come out as "DCSS & CTCSS Setting"
2. For mute tone, select mute tone (No voice guidance, no display on LCD), and press Jog dial one more
time to complete selection.- voice guidance
4
To complete
selection & turn
off (Power OFF)
To finish setting of tone, use power off and U will hear a voice guidance as “Completed"
After Beep, LCD OFF
2. Power on Bluetooth Pairing
1
Pairing
Button/Dial
Power Key + Press Jog Button more than 3 sec
It is impossible to interconnect a Cellphone via Bluetooth to the FRS/GMRS for retransmission,
it only for Cellphone via Bluetooth playing music to link the device. Not in GMRS/FRS bands
2 Display
1.Display Beep one time
2. Voice display : "Bluetooth Pairing"
3. LED Blinking
3
Paring Time
& pin number
1.Start pairing with Master’s mobile
PIN Code is "0000".
2. Only 10 minutes will be allowed for you to do pairing.
