6
ES
GUÍA DE REFERENCIA RÁPIDA
SlimPAR T6BT GRR Rev. 1
Contacto
Fuera de EE. UU., Reino Unido, Irlanda, Benelux, Francia, Alemania o México póngase en contacto con su distribuidor
para solicitar asistencia o devolver un producto. Visite
para información de contacto.
Qué va incluido
Para empezar
Desembale su SlimPAR T6BT y asegúrese de que ha recibido todas las partes en buen estado. Si la caja o los
componentes parecen dañados, notifíqueselo inmediatamente al transportista, no a Chauvet.
Corriente alterna
Este producto tiene una fuente de alimentación con detección automática que puede funcionar con un rango de tensión
de entrada de 100–240 VCA, 50/60 Hz.
Alimentación en cadena
Para ver el máximo número de SlimPAR T6BT que se pueden alimentar en cadena a 120 V o a 240 V, consulte el
Manual de usuario o la etiqueta del producto.
Sustitución del fusible
1.
Desconecte el producto de la alimentación.
2.
Haga cuña con la punta de un destornillador plano en la ranura del portafusibles.
3.
Saque la tapa de seguridad de la carcasa.
4.
Quite el fusible fundido de la sujeción en la parte frontal de la tapa de seguridad y sustituya el fusible con otro
del mismo tipo y categoría.
5.
Vuelva a insertar el portafusibles y conecte de nuevo la alimentación.
Montaje
Antes de montar este producto, lea las
.
Diagrama de montaje
•
SlimPAR T6BT
•
Cable de alimentación
•
Guía de referencia rápida
Para evitar un desgaste innecesario y alargar su vida útil, desconecte completamente el producto
mediante el interruptor o desenchufándolo durante periodos en que no se use.
!
Montaje en altura
Montaje en el suelo
Abrazadera de montaje
(como el
CLP-15
from Chauvet)
Soporte de montaje
Cable de seguridad
(como el
CH-05
de Chauvet)