3
EN
QUICK REFERENCE GUIDE
Maverick Storm 2 BeamWash QRG Rev. 2
Mounting
Before mounting this product, read the
. Use at least two mounting points per product. Make sure the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
.
Mounting Diagram
Control Panel Description
Battery Powered Display
Press and hold until menu screen appears (approximately 15 seconds).
Technician Mode
The technician mode disables the pan and tilt motors, allowing the output of the product to be aimed by hand. To enable
the technician mode of the Maverick Storm 2 BeamWash, hold
<UP>
and
<LEFT>
while the product is powering on.
When the product is turned off and back on, the pan and tilt will return to normal function.
Button
Name
Function
<
>
<UP>
Navigates upwards through the menu list or increases the numeric value when in a
function
<
>
<MENU>
Exits from the current menu or function
<
>
<DOWN>
Navigates downwards through the menu list or decreases the numeric value when in a
function
<
>
<LEFT>
Navigates leftwards through the menu list
<
>
<ENTER>
Enables the currently displayed menu or sets the currently selected value into the selected
function
<
>
<RIGHT>
Navigates rightwards through the menu list
Safety cable
Mounting clamps
Overhead mounting
Floor mounting
Omega brackets