background image

Page 3 of 27

onAir IP Panel 1 User Manual Rev. 2

Introduction

2. Introduction

Description

The onAir IP Panel 1 is an IP65 full-spectrum LED soft light with a 1x1 format for outdoor or indoor 

operation. Ready for any broadcast setting, the onAir IP Panel 1 features high CRI/ TLC and TM-30 

scores, a smooth 16-bit dimming curve, +/- green adjustment, an emulated redshift, built-in customizable 

effects, and a drop-in slot for easy changing of accessories. Mounting options include a Jr Pin and an 

Omega Bracket. PWM, DMX, RDM, CRMX™, Art-Net™, sACN, and an onboard control option ensure 

camera-ready use. An optional 28 VDC input via 3-pin XLR enables use of an external battery pack to add 

increased flexibility for all remote needs.

Features

Full-spectrum LED 1x1 format soft light panel style fixture for broadcast, film, and special events

IP65 rating for all weather use indoors or out.

Linear color temperature presets from 2800 K to 8000 K with high CRI and CQS

Virtual color wheel with color matched to popular gel colors

+/- Green adjustment and emulated red-shift via DMX or on-board control

RDM (Remote Device Management) and CRMX Wireless Control for added flexibility

Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera

Virtually silent operation for use in studio applications

Ultra-smooth 16-bit dimming curves and speeds to complement any lighting scheme.

Easily switch mounting options from Jr Pin to Omega Bracket

Drop-in slot for diffusers and intensifier filter (sold separately) 

Rugged design for years of rough use in the most extreme conditions.

Easy to use on-board control with full access to all the features of the fixture without the need for a 

dedicated controller.

USB port for fixture software updates

28 VDC power input via 3-pin XLR to power the fixture from an external battery pack

Product Overview

Menu 

buttons

LCD 

display

5-pin 

DMX 

in

Power 

out

Carry 

handle 

(x4)

Power 

in

Control 

knobs

Ethernet 

port

CRMX™ 

antenna

USB C 

port

5-pin 

DMX 

out

28 VDC 

power 

in

Ethernet 

port

Preset 

buttons

Summary of Contents for onAirPanel1IP
































Reviews: