Chauvet Professional Well STX 180, User Manual

Page 20 of 24

 Operation

WELL STX 180 User Manual Rev. 1

Infrared Remote Control

Infrared (IR) mode allows the product to be controlled with an infrared remote control. The IR remote can 

remotely set the product to various modes; adjust the color, speed, and sensitivity; and set the strobe. The 
WELL STX 180 is compatible with the IR remote (sold separately) from Chauvet.

IR Remote Operation

Ensure that the IR remote is pointing directly at the product, and there is nothing in between the remote 
and the product.

It may be necessary to turn the product off and on again when switching from W-DMX 

to IRC and vice versa.

Automatic Mode

Automatic mode will enable the automatic programs on the product.

To turn on Automatic mode:

1. Press 

<AUTO>

 on the IR remote.

2. Press 

<+>

 or 

<–>

 to choose between the 28 auto programs.

To adjust the speed of the automatic program:

1. Press 

<SPEED>

 on the IR remote.

2. Press 

<+>

 or 

<–>

 to increase or decrease the speed.

Manual Color Control

To choose a specific color with the IR remote, press any number between 

<0>

 and 

<9>

. To manually control the RGBW percentage:

1. Press 

<MANUAL>

 on the IR remote.

2. Press 

<R>

, 

<G>

, 

<B>

, or 

<W>

 (red, green, blue, or white) to choose a color.

3. Press 

<+>

 or 

<–>

 to increase or decrease the value of the selected color.

Miscellaneous Operation

To black out the lights:

•

Press 

<BLACKOUT>

 on the IR remote. This will turn off all the lights until the 

button is pressed again.

To adjust the output level:

1. Press 

<%>

 on the IR remote.

2. Press 

<+>

 or 

<–>

 to increase or decrease the output level.

Note: The IR remote will not respond to any inputs when the Black Out mode is activated. If the 

remote does not respond when a button is pressed, try pressing <BLACK OUT>. You may have 

inadvertently activated the Black Out mode.