background image

Page 1 of 24

WELL STX 180 User Manual Rev. 1

Before You Begin

1. Before You Begin

What Is Included

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the 

package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from shipping, or show 

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier 

immediately may invalidate your claim. In addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping, or concealed 

damage, file a claim with Chauvet within 7 days of delivery.

Manual Conventions

Symbols

Expected LED Lifespan

Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than 

single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 

40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit 

the overall intensity.

(6) WELL STX 180

TRUE1-style power cord with Edison plug 

(EU bare end)

Charging flight case

(6) stands

(12) magnetic clamps

(6) hanging eye bolts

(6) stealth black filters

Quick Reference Guide

Convention

Meaning

1–512

A range of values

50/60

A set of values of which only one can be chosen

<SET>

A button on the product’s control panel

Settings

A product function or a menu option

Symbol

Meaning

Electrical warning. Not following these instructions may cause electrical damage to 

the product, accessories, or the user.

Critical installation, configuration, or operation information. Not following these 

instructions may make the product not work, cause damage to the product, or cause 

harm to the operator.

Important installation or configuration information. The product may not function 

correctly if this information is not used.

Useful information.

Any reference to data or power connections in this manual assumes the use of 

Seetronic IP-rated cables.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital 

data transmission protocol.

Summary of Contents for Well STX 180





























Reviews: