5
EN
QUICK REFERENCE GUIDE
ÉPIX Strip IP QRG Rev. 2
Series Attachment Instructions
The ÉPIX Strip IP can be attached in an end to end formation to create a strip up to 4 meters long from one mounting
point. Do not connect any more than 4 ÉPIX Strip IP products in a row when hanging vertically.
1.
Loosen the 2 fastening eye bolts.
2.
Slide the connecting bracket out until it stops and tighten the eye bolt closest to the center of the product.
3.
Slide the second ÉPIX Strip IP into the connecting bracket and tighten the remaining eye bolt.
4.
Attach the safety cable as shown in
Vertical Mounting Instructions
.
Install the safety cable last when attaching ÉPIX Strip IP products in series.
1
2
3
