Page 22 of 96
GigBAR™ IRC User Manual Rev. 3
System
Settings
To restore factory default settings, or make changes to individual pod settings, follow the
directions below.
1. Press
<MENU>
repeatedly until
SyS
blinks on the display.
2. Press
<ENTER>
.
3. Use
<UP>
or
<DOWN>
to select
rSEt
(factory default) or
dSET
(changes pod
arrangement).
4. Press
<ENTER>
to select the desired system setting.
If
rSEt
is selected, GigBAR™ IRC is restored to factory default settings.
Default Pod
Arrangement
If
dSEt
is selected, change the order of the pods by using the
steps and examples below to arrange the order of the pods:
•
Use
<UP>
to move right on the display.
•
Use
<DOWN>
to change the digit value (
1
,
2
,
3
, or
4
).
•
Press
<ENTER>
to confirm.
•
Repeat until all 4 pods are arranged as desired.
Examples of
Pod Order
Rearrangement
Pod 1
Pod 4
Pod 2
Pod 3
1, 2, 3, or 4
•
1*34
•
123*
•
*234
•
12*4
Move Right
Pick a Digit
Ex. 1
Ex. 2
Pod 1
Pod 1
Pod 2
Pod 2
Pod 3
Pod 3
Pod 4
Pod 4
