Page 8 of 16
Gobo Zoom™ USB User Manual Rev. 1
Mounting
Before mounting the product, read and follow the safety recommendations indicated in the
Safety Notes
.
Orientation
The Gobo Zoom™ USB may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
Rigging
•
Before deciding on a location for the product, always make sure there is easy access
to the product for maintenance and programming purposes.
•
Make sure that the structure onto which you are mounting the product can support the
product’s weight. See the
Technical Specifications
for weight information.
•
When mounting the product overhead, always use a safety cable. Mount the product
securely to a rigging point, whether an elevated platform or a truss.
•
When rigging the product onto a truss, use a mounting clamp of appropriate weight
capacity.
•
When power linking multiple products, mount the products close enough for power
linking cables to reach.
•
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
Mounting Diagram
Mounting Clamp
(such as the CLP-
15N from Chauvet)
Hanging/Mounting
Bracket
(also used as floor
supports)
Safety Cable
(such as CH-05
from Chauvet)
Bracket
Adjustment Knob
x 2
Summary of Contents for Gobo Zoom LED
Page 1: ...User Manual ...
