Operating Instructions
ILS-606 & ILS-625 User Manual
12
2005-03-09/22:45
3)
Press the MENU button to confirm or leave alone for 8 seconds.
Fixture Test and Service Functions {FAdJ}, {teSt}, {FhrS}, {rSet}
F O CUS ADJUS T M E NT {F ADJ }
The focus adjustment tool activates a pre-set program that turns the lamp on and projects a gobo image so
that you can manually adjust the focus.
1)
Tap the MENU button until the display reads {FAdJ}.
2)
Press ENTER and the display will blink.
3)
Adjust the focus by rotating the lens gun in the direction that
brings the image into focus.
4)
Press the MENU button to leave this mode.
F I XT URE S E LF -T E ST {T E ST }
The test sequence will run through all of the projection capabilities of each individual fixture, including gobo
and color effects.
1)
Tap the MENU button until the display reads {teSt}.
2)
Press ENTER and the fixture will immediately begin to play back a test sequence. Observe tentatively
for any abnormalities.
3)
Press the MENU button to leave this mode.
F I XT URE RE S ET {RS ET }
This function will re-initialize the fixture by returning all motors to its startup positions or otherwise known
as (home position).
1)
Tap the MENU button until the display reads {rSet} and press ENTER.
F I XT URE HO URS {F HRS }
The (fixture hours) readout displays the number of hours the fixture has been in use. It is not uncommon to
find new fixtures with a few logged hours. This means the fixture was thoroughly tested prior to delivery.
1)
Tap the MENU button until the display reads {FhrS}.
2)
Press ENTER to view the total working hours.
3)
You can leave alone and the display will return to the regular menu or press MENU button to return to
main menu.
