Intimidator Spot Duo 155 QRG
EN
4
Fuse
Replacement
1.
Disconnect the product from power.
2.
Wedge the tip of a flat-head screwdriver, loosen the fuse holder and pull
straight out.
3.
Remove the blown fuse from the safety cap and replace with a fuse of the
exact same type and rating.
4.
Re-insert the fuse holder.
5.
Reconnect the product to power.
Mounting
Before mounting this product, read the
Safety Notes
.
Mounting
Diagram
When using only one mounting clamp with this fixture, you must use a
clamp with a captive bolt to prevent accidental loosening.
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases
the numeric value when in a function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
Tripod Insertion
Hanging Bracket
Rubber Feet
Mounting Clamp
Safety Cable
Summary of Contents for INTIMIDATOR SPOT DUO 155
Page 1: ...Quick Reference Guide...