background image

  

 

 

Appendix 

Returns Procedure 

Retur

chandise must be sent prepaid and in the original packing, call tags will not be issued. 

Pac

 Return Merchandise Authorization Number (RA #). Products 

returne  w

UVET and request RA # prior to shipping the 

fixt

 number, serial number and a brief description of the cause 

for the r turn. Be

y shipping damage resulting from inadequate 

packaging is the customer’s responsibility. CHAUVET reserves the right to use its own discretion to 

repair or replace 

er UPS packing or double-boxing is always a safe 

me

Claims 

ned mer

kage must b

d

ithout 

e clearly labeled with a

an RA # will be refused. Call CHA

ure. Be prepared to provide the model

e

 sure to properly pack fixture, an

product(s). As a suggestion, prop

thod to use. 

Damage incurred

refore the damage must be 

rep

pon r

the customer's responsibility to notify and 

sub

s damaged due to shipping.  Any other claim 

for 

g co

elated to shipping, and concealed damage, 

mu

dise.  

Photometrics 

 in shipping is the responsibility of the shipper; the

orted to the carrier u

eceipt of merchandise. It is 

mit claims with the shipper in the event that a fixture i

items such as missin

mponent/part, damage not r

st be made within seven (7) days of receiving merchan

 

19° B

gle 

eam An

104 

26 

1119 

280 

3.3 

6.6 

 9.8   Distance (feet) 
 3 

  Distance 

(meters) 

 11.6 

Foot  Candles 

 124   LUX 

 

19° 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LEDrain™38 User Manual 

11 

 

2007-11-28/10:08 

Summary of Contents for LEDrain 38














Reviews: