EN
Q-Spot™ 560 LED QRG
3
DMX Linking
The Q-Spot™ 560 LED will work with a DMX controller using a regular
DMX serial connection. A DMX Primer is available from
www.chauvetpro.com
.
DMX
Connection
The Q-Spot™ 560 LED uses a regular DMX data connection for its DMX
personalities:
Basic
and
Advanced
. See the User Manual to connect and
configure for DMX operation.
Master/Slave
Connection
The Q-Spot™ 560 LED uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Mounting
Product
Mounting
Diagram
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases
the numeric value when in a function
Password
After being prompted, enter the following password by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This password cannot be changed and must be used whenever prompted.
Overhead Mounting
Floor Mounting
Omega Bracket
Safety Cable
All manuals and user guides at all-guides.com