Shocker™ 90 IRC User Manual Rev. 1
Page 15 of 18
5.
M
AINTENANCE
Product
Maintenance
Dust build-up reduces light output performance and can cause overheating. This can lead
to reduction of the light source’s life and/or mechanical wear. To maintain optimum
performance and minimize wear, clean your lighting products at least twice a month.
However, be aware that usage and environmental conditions could be contributing factors
to increase the cleaning frequency.
To clean the product, follow the instructions below:
1. Unplug the product from power.
2. Wait until the product is at room temperature.
3. Use a vacuum (or dry compressed air) and a soft brush to remove dust
collected on the external surface/vents.
4. Clean all transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
5. Apply the solution directly to a soft, lint free cotton cloth or a lens cleaning
tissue.
6. Softly drag any dirt or grime to the outside of the transparent surface.
7. Gently polish the transparent surfaces until they are free of haze and lint.
Always dry the transparent surfaces carefully after cleaning them.
Summary of Contents for Sgocker 90 IRC
Page 1: ...User Manual ...
