4. Operating Instructions
9
6/24/2013 11:35 AM
4.
O
PERATING
I
NSTRUCTIONS
Configuring the Starting Address
The SlimPAR™ Pro TRI
fixture uses
9
DMX channels in its maximum setting. In this DMX
configuration/personality, the highest channel that the fixture may be set to in order to function
properly is
504
. Any address higher than this will prevent access to all of the channels, while in this
mode; however, if you desire to use one of the other DMX channels configurations (personalities),
please consider the total DMX channels when selecting a DMX address.
If this is your first time using DMX, we recommend reading the “DMX Primer” section in the
“Appendix”.
Control Panel Functions
Access control panel functions using the four buttons located directly underneath the LED display
on the included wired remote.
B
UTTON
F
UNCTION
<MENU>
Used to scroll through the
current operating mode,
as well as back out of the
current menu option
<ENTER>
Used to select a move to
the right in the menu map
and select a value and
store it to memory
<UP>
Used to select increasing
advancement in the value
<DOWN>
Used to select decreasing
advancement in the value
The Control Panel shows the current state of the unit. It is used to select the operating
mode, as well as the sub-features. For a detailed layout of the control panel functions,
please see the “menu map” section.
MENU ENTER UP DOWN
