background image

 

 

 

 

SlimPAR™ Tri IRC series User Manual (Rev. 5) 

Page 17 of 18 

 

 

To return a product or request support: 

  In the U.S., contact CHAUVET® World Headquarters (see below).  

  In the UK or Ireland, contact CHAUVET® Europe Ltd. (see below).  

  In any other country, DO NOT contact CHAUVET®. Contact your distributor. See 

www.chauvetlighting.com

 for distributors outside the U.S., United Kingdom, or 

Ireland.. 

 

If you live outside the U.S., United Kingdom, or Ireland, contact your distributor of 

record and follow their instructions on how to return CHAUVET® products to 

them. Visit our website for contact details. 

Returns 

Call the corresponding CHAUVET®  Technical Support office and request a Return 

Merchandise Authorization (RMA) number before shipping the product. Be prepared to 

provide the model number, serial number, and a brief description of the cause for the 

return. 
You must send the merchandise prepaid, in its original box, and with its original packing 

and accessories. CHAUVET® will not issue call tags.  
Clearly label the package with the RMA number. CHAUVET®  will refuse any product 

returned without an RMA number. 

 

 

 

Write the RMA number on a properly affixed label. DO NOT write the RMA number 

directly on the box. 

 

 

 

Before sending the product, clearly write the following information on a piece of paper 

and place it inside the box: 

  Your name 

  Your address 

  Your phone number 

  The RMA number 

  A brief description of the problem 

Be sure to pack the product properly. Any shipping damage resulting from inadequate 

packaging will be your responsibility. FedEx packing or double-boxing are 

recommended. 

 

 

 

CHAUVET®  reserves the right to use its own discretion to repair or replace 

returned product(s). 

 

 

CHAUVET® 

Contact 

Information

 

World Headquarters 

CHAUVET® 

General Information

 

Address: 

5200 NW 108th Avenue 

 

Sunrise, FL 33351 

Voice:  

(954) 929-1115 

Fax:  

(954) 929-5560 

Toll free:  

(800) 762-1084 

United Kingdom & Ireland 

CHAUVET® Europe Ltd. 

General Information 

 

Address:  

Unit 1C 

 

Brookhill Road Industrial Estate 

 

Pinxton, Nottingham, UK 

 

NG16 6NT 

Voice:  

+44 (0)1773 511115 

Fax:  

+44 (0)1773 511110 

 

Technical Support

 

Voice:  

(954) 929-1115 (Press 

4

Fax:  

(954) 756-8015 

Email:  

tech@chauvetlighting.com

  

Technical Support

 

Email:  

uktech@chauvetlighting.com

  

 

 

World Wide Web 

 

www.chauvetlighting.com

  

World Wide Web 

 

www.chauvetlighting.co.uk

  

 

 

Summary of Contents for Slim PAR TRI 12 IRC



















Reviews: