Chauvet TFX-950CM User Manual Download

Page: 19 / 21

Appendix

TFX-950CM User Manual

Revision: 2006-01-20/16:37

Returns Procedure

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.

Package must be clearly labeled with a Return Merchandise Authorization Number (RA #). Products

returned without an RA # will be refused. Call CHAUVET and request RA # prior to shipping the

fixture. Be prepared to provide the model number, serial number and a brief description of the cause

for the return. Be sure to properly pack fixture, any shipping damage resulting from inadequate

packaging is the customer

’

s responsibility. CHAUVET reserves the right to use its own discretion to

repair or replace product(s). As a suggestion, proper UPS packing or double-boxing is always a safe

method to use.

Claims

Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be

reported to the carrier upon receipt of merchandise. It is the customer's responsibility to notify and

submit claims with the shipper in the event that a fixture is damaged due to shipping. Any other claim

for items such as missing component/part, damage not related to shipping, and concealed damage,

must be made within seven (7) days of receiving merchandise.

Summary of Contents for TFX-950CM






















Search results

Summary of Contents for TFX-950CM

Reviews:

Related manuals for TFX-950CM

Brands by name

Popular brands

Chauvet TFX-950CM, User Manual

Search results

Summary of Contents for TFX-950CM

Reviews:

Related manuals for TFX-950CM

Brands by name

Popular brands