VIP™ Driver QRG
EN
2
About this
Guide
The VIP™ Driver Quick Reference Guide (QRG) has basic product information
such as connection, mounting, and installation information. Download the User
Manual from
Disclaimer
•
The information and specifications contained in this QRG are subject
to change without notice.
•
You must read ALL the disclaimers and Safety Notes in this QRG, as
well as those in the product’s User Manual before installing, operating,
and maintaining this product.
•
Please refer to all applicable local codes and regulations for the proper
installation of the product.
Safety Notes
•
DO NOT open this product. It contains no user-serviceable parts.
•
Mount this product in a location with adequate ventilation, at least
20 in (50 cm) from adjacent surfaces.
•
DO NOT leave any flammable material within 50 cm of this product
while being operated or connected to power.
•
USE a safety cable when mounting this product overhead.
•
DO NOT operate this product outdoors or in any location where dust,
excessive heat, water, or humidity may affect it. (IP20)
•
DO NOT operate this product if the housing or cables appear
damaged.
•
Do not run this product near magnets, TVs, or transformers.
•
ONLY connect this product to a grounded and protected circuit.
•
Any damages caused by manual modifications are not subject to
warranty. CHAUVET® will not accept liability for any resulting
damages caused by unauthorized modifications or not observing the
safety warnings and instructions in this manual.
•
In the event of a serious operating problem, stop using immediately.
•
The maximum ambient temperature is 104 °F (40 °C). Do not operate
this product at higher temperatures.
Contact
Outside the U.S., United Kingdom, Ireland, or Mexico, contact your distributor
to request support or return a product. Visit
contact information.
What Is
Included
•
VIP™ Driver
•
Power Cord
•
USB Cable
•
9-pin RS-232 cable
•
Warranty Card
•
Quick Reference Guide
