VIP™ Driver QRG
EN
6
Mounting
Before mounting this product, read the Safety Notes at the beginning of this
guide. The VIP™ Driver can be rack-mounted using the mounting ears on
either side of the front panel.
Product
Mounting
Diagram
Calculating the
Number of
Panels per
VIP™ Driver
The VIP™ Driver provides two signal output connections:
U-Main Out
and
D-Backup Out
. The number of panels you can use will differ based on whether
you are using the
U-Main Out
connection as the primary output and the
D-Backup Out
connection as a backup, or if you are using both as outputs
together to increase the screen resolution.
The default resolution for the VIP™ Video Wall is 1280 x 1024. The following
provides the calculation and diagram for determining the number of panels that
can be supported by one VIP™ Driver for each scenario.
The MVP™ 18 will be used for each scenario. That panel has a pixel count of
32 x 32.
Refer to the MVP™/PVP™ Series Getting Started User Manual for pixel and
other panel information.
Using U-Main Out
and
D-Backup Out
Together as Primary
Output
Using the pixel ratio of the panel(s), calculate the number of panels as follows.
MVP 18 (32 x 32):
1280/32 = 40 panels
1024/32 = 32 panels
The VIP™ Driver can support a video wall using MVP™ 18 that is
40 x 32 panels, or 1,280 panels in total. Refer to the following example:
1-Unit Rack Mount
Video Wall using
MVP™ 18 panels
1280 = 40 panels
1024 = 32 panels
